Features Key features of the AMD Athlon 4 1000. The AMD Athlon 1 GHz Slot Ais a revision using the Thunderbird core with the addition of 256 kB of L2 cache which runs at full CPU speed.
- Amd Athlon 1000 Mhz Slot Antenna
- Amd Athlon 1000 Mhz Slot Am Fm
- Amd Athlon 1000 Mhz Slot Antennas
- Amd Athlon Slot A
Amd Athlon 1000 Mhz Slot Antenna
| Type | SECC |
|---|---|
| Chip form factors | PGA |
| Contacts | 242 |
| FSB protocol | EV6 |
| FSB frequency | 200 MT/s, 266 MT/s |
| Voltage range | 1.3 - 2.05 V |
| Processors | AMDAthlon (500-1000 MHz) |
| Predecessor | Super Socket 7 |
| Successor | Socket A |
| This article is part of the CPU socket series |
Slot A is the physical and electrical specification for a 242-lead single-edge-connector used by early versions of AMD's Athlon processor.[1]
The Slot A connector allows for a higher bus rate than Socket 7 or Super Socket 7. Slot A motherboards use the EV6 bus protocol, a technology originally developed by Digital Equipment Corporation (DEC) for its Alpha 21264 microprocessor.
Faster Slot-A processors had to compromise further and run at 2/5 (up to 850 MHz, 340 MHz cache) or 1/3 (up to 1 GHz, 333 MHz cache). This later race to 1 GHz (1000 MHz) by AMD and Intel further exacerbated this bottleneck as ever higher speed processors demonstrated decreasing gains in overall performance—stagnant SRAM cache memory speeds. 242-pin Slot-A EV6 CPU Interface running at 100MHz DDR (effectively 200MHz) 1.80v core voltage In order to reach 900MHz, AMD made use of two tricks that overclockers are quite familiar with. AMD Radeon™ Graphics. AMD Athlon™ Processors. AMD Athlon™ Mobile Processors with Radeon.
Amd Athlon 1000 Mhz Slot Am Fm
Slot A is mechanically compatible but electrically incompatible with Intel's Slot 1. As a consequence, Slot A motherboards were designed to have the connector's installed orientation be rotated 180 degrees relative to Slot 1 motherboards to discourage accidental insertion of a Slot 1 processor into a Slot A motherboard, and vice versa. The choice to use the same mechanical connector as the Intel Slot 1 also allowed motherboard manufacturers to keep costs down by stocking the same part for both Slot 1 and Slot A assemblies.
Slot A was superseded by Socket A.
See also[edit]
References[edit]
This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the 'relicensing' terms of the GFDL, version 1.3 or later.
Amd Athlon 1000 Mhz Slot Antennas
- ^'CPU Sockets Chart'. users.erols.com. Retrieved 2009-04-04.
Amd Athlon Slot A
